in this post I will explain how to apply Termidor SC termicide around your house through a cement foundation.
supplies needed:
- rotor hammer drill
- Termidor SC
- 2- 5 gallon buckets
- funnel
- 1 quart measuring container
- cement patch
- cement trowel
step 1:
- Drill holes for Termidor Application around home, holes should be no more than 12 inches apart and should be drilled through cement into soil below.
Step 2:
-Mix Termidor SC with water, for this you will want to mix .8fl Oz of Termidor to 1 Gallon of water. I mixed 4 gallons worth at a time. you will want to mark your 5 gallon bucket for the appropriate gallons you will mix to.
Step 3:
- Pour Termidor mix into holes.
you should pour about 1 quart of solution into each hole previously drilled. some holes will take longer to absorb the mixture, some soils are more compact then others. what I found helps is to make sure you went as deep as possible into the dirt with the drill bit.
Step 4:
- Patch holes with cement patch.
mix some cement patch with water to the correct consistency in a 5 gallon buckets and patch holes with cement trowel.
your all done applying your Termidor around your house in the cement locations! follow this link to my next blog about applying Termidor to area around the house that are dirt.
